Electronics and Embedded Software for Medical Devices

We provide full-service R&D consulting from concept and design to production of devices for human use and instruments. Our multidisciplinary team knows the regulatory process and procedures and delivers high-quality products on time and on budget. Voler Systems can design to the strict requirements for federal and European design that include: IEC60601 – medical device requirements IEC62304 [...]

July 10th, 2016|Categories: Embedded Systems, Medical Devices, Recent Projects, Software and Firmware, V2016|

IoT based on ARM processor and TI CC32000 Wifi Module

We recently delivered two different IoT projects that were both based on the TI CC32000 Wifi Module with an ARM Cortex-M4 processor. We selected the ARM Cortex-M4 because it's low-power 16-bit processor was ideal for our real-time application.  The TI module nicely integrates the ARM processor, wifi block, timers, the Analog-to-Digital Converter (ADC) channels, and [...]

January 12th, 2016|Categories: Embedded Systems, IoT, Recent Projects, Ultra Low Power, V2016, Wireless|Tags: |

RTECC Slides: Sensors, Wearable Devices, and IoT Trends

If you missed Voler Systems at RTECC, here are the slides.  

March 11th, 2015|Categories: Embedded Systems, IoT, News|

The IoT Journey Begins at RTECC 2015

Walt Maclay is an invited speaker at Real-Time Embedded Computing Conference (RTECC), a FREE event dedicated to bringing the design community together to share challenges, solutions and inspiration for evolving and emerging industries. Walt will share with his vision of Sensors, Wearable Devices, and IoT trends on January 22, 2015 at 2pm. Register for free [...]

January 9th, 2015|Categories: Embedded Systems, IoT, News|

Software: Testing Motion Detection for Wearable Devices

Active Mind Technology provides golfers with stats and trending information about their golf game. Their product, Game Golf, uses GPS to track location, accelerometers to track swing and related information, and uses Near Field Communication (NFC) tags to identify each club. They approached Voler Systems after early prototypes exhibited erratic behavior. Because of their commitment to quality they [...]

Looking for a World-Class Embedded Engineer

Voler is an expert in all types of measurements, analog circuit design, digital circuit design, and mixed signal design, as well as measurement and control software. Specializing in sensors, motion control, wireless, and medical device design, my staff of senior engineers and I can design a new product rapidly that works the first time. They [...]

Wireless USB Boasts Convenience for Industrial and Embedded Solutions

Universal serial bus (USB) is an economical and convenient connection for both industrial and commercial applications; USB continues to replace many legacy serial connections (i.e. RS-232, 485).

However, for some industrial and embedded solutions, wireless USB is becoming the choice interface for enabling connectivity to new applications. Products are moving to wireless USB to eliminate cables and to gain the convenience of always being connected.

May 3rd, 2011|Categories: Embedded Systems, IoT, V2011, Wireless|Tags: , |

Microprocessor Design

Microprocessor Design Our embedded microprocessor design consultants have developed dozens of embedded designs with microprocessors and digital logic circuit design. We have used microprocessors from Intel, Renesas, PIC, etc. What Are Microprocessors? Embedded design is generally considered to be a dedicated function built into a device, as opposed to a general purpose PC. [...]

October 21st, 2009|Categories: Embedded Systems, FPGA, Recent Projects, V2009|

Digital Circuit Design Engineers for USB, FPGA, and Microprocessors

Our engineering design consultants are highly experienced with a wide range of technologies, which enables us to create innovative designs for a wide variety of products, always with the highest quality. Our digital circuit design engineers have developed: FPGA designs (field programmable gate array) USB designs embedded microprocessor designs memory designs Ethernet and serial interfaces [...]

September 10th, 2009|Categories: Embedded Systems, FPGA, Recent Projects, V2009|

Using ZigBee to Integrate Handheld Tester

Voler was approached by a service provider with a need for handheld HVAC testers that service field representatives could use when they go to residences and businesses to perform an energy audit for the owners' heating and air-conditioning systems.

Voler worked with the IT manager and a lead user to develop a written specification to meet their needs. Together we developed a proposal for a testing system with three remote units that are wirelessly connected to a master that plugs into the USB port on a PC.